Vertically Oriented Quasi-2D Perovskite Grown In-Situ by Carbonyl Array-Synergized Crystallization for Direct X-Ray Detectors.

Quasi-2D perovskite quantum wells are increasingly recognized as promising candidates for direct-conversion X-ray detection. However, the fabrication of oriented and uniformly thick quasi-2D perovskite films, crucial for effective high-energy X-ray detection, is hindered by the inherent challenges of preferential crystallization at the gas-liquid interface, resulting in poor film quality. In addressing this limitation, a carbonyl array-synergized crystallization (CSC) strategy is employed for the fabrication of thick films of a quasi-2D Ruddlesden-Popper (RP) phase perovskite, specifically PEA2MA4Pb5I16. The CSC strategy involves incorporating two forms of carbonyls in the perovskite precursor, generating large and dense intermediates. This design reduces the nucleation rate at the gas-liquid interface, enhances the binding energies of Pb2+ at (202) and (111) planes, and passivates ion vacancy defects. Consequently, the construction of high-quality thick films of PEA2MA4Pb5I16 RP perovskite quantum wells is achieved and characterized by vertical orientation and a pure well-width distribution. The corresponding PEA2MA4Pb5I16 RP perovskite X-ray detectors exhibit multi-dimensional advantages in performance compared to previous approaches and commercially available a-Se detectors. This CSC strategy promotes 2D perovskites as a candidate for next-generation large-area flat-panel X-ray detection systems.

Spherical Binderless 4A/5A Zeolite Assemblies: Synthesis, Characterization, and Adsorbent Applications.

Zeolite microspheres have been successfully applied in commercial-scale separators such as oxygen concentrators. However, further enhancement of their applications is hampered by the post-synthetic shaping process that formulates the zeolite powder into packing-sized spherical bodies with various binders leading to active site blockage and suboptimal performance. Herein, binderless zeolite microspheres with a tunable broad size range from 2 µm to 500 µm have been developed with high crystallinity, sphericity over 92%, monodispersity with a coefficient of variation (CV) less than 5%, and hierarchical pore architecture. Combining precursor impregnation and steam-assisted crystallization (SAC), mesoporous silica microspheres with a wide size range could be successfully transformed into zeolite. For preserved size and spherical morphology, a judicious selection of the synthesis conditions is crucial to ensure a pure phase, high crystallinity, and hierarchical architecture. For the sub-2-µm zeolite microsphere, low-temperature prolonged aging was important so as to suppress external zeolization that led to a large, single macroporous crystal. For the large 500 µm sphere, ultrasound pretreatment and vacuum impregnation were crucial and facilitated spatially uniform gel matrix dispersion and homogenous crystallization. The obtained zeolite 5A microspheres exhibited excellent air separation performance, while the 4A microspheres displayed ammonium removal capabilities. This work provides a general strategy to overcome the existing limitations in fabricating binder-free technical bodies of zeolites for various applications.

Spatially selective defect management of CsPbI3 films for high-performance carbon-based inorganic perovskite solar cells.

Defects formed at the surface, buried interface and grain boundaries (GB) of CsPbI3 perovskite films considerably limit photovoltaic performance. Such defects could be passivated effectively by the most prevalent post modification strategy without compromising the photoelectric properties of perovskite films, but it is still a great challenge to make this strategy comprehensive to different defects spatially distributed throughout the films. Herein, a spatially selective defect management (SSDM) strategy is developed to roundly passivate various defects at different locations within the perovskite film by a facile one-step treatment procedure using a piperazine-1,4-diium tetrafluoroborate (PZD(BF4)2) solution. The small-size PZD2+ cations could penetrate into the film interior and even make it all the way to the buried interface of CsPbI3 perovskite films, while the BF4- anions, with largely different properties from I- anions, mainly anchor on the film surface. Consequently, virtually all the defects at the surface, buried interface and grain boundaries of CsPbI3 perovskite films are effectively healed, leading to significantly improved film quality, enhanced phase stability, optimized energy level alignment and promoted carrier transport. With these films, the fabricated CsPbI3 PSCs based on carbon electrode (C-PSCs) achieve an efficiency of 18.27%, which is among the highest-reported values for inorganic C-PSCs, and stability of 500 h at 85 °C with 65% efficiency maintenance.

Colloidal Zeta Potential Modulation as a Handle to Control the Crystallization Kinetics of Tin Halide Perovskites for Photovoltaic Applications.

Tin halide perovskites (THPs) have demonstrated exceptional potential for various applications owing to their low toxicity and excellent optoelectronic properties. However, the crystallization kinetics of THPs are less controllable than its lead counterpart because of the higher Lewis acidity of Sn2+, leading to THP films with poor morphology and rampant defects. Here, a colloidal zeta potential modulation approach is developed to improve the crystallization kinetics of THP films inspired by the classical Derjaguin-Landau-Verwey-Overbeek (DLVO) theory. After adding 3-aminopyrrolidine dihydro iodate (APDI2) in the precursor solution to change the zeta potential of the pristine colloids, the total interaction potential energy between colloidal particles with APDI2 could be controllably reduced, resulting in a higher coagulation probability and a lower critical nuclei concentration. In situ laser light scattering measurements confirmed the increased nucleation rate of the THP colloids with APDI2. The resulting film with APDI2 shows a pinhole-free morphology with fewer defects, achieving an impressive efficiency of 15.13 %.

Graphene Chainmail Shelled Dilute Ni─Cu Alloy for Selective and Robust Aqueous Phase Catalytic Hydrogenation.

Cost-effective non-noble metal-based catalysts for selective hydrogenation with excellent activity, selectivity, and durability are still the holy grail. Herein, an oxygen-doped carbon (OC) chainmail encapsulated dilute Cu-Ni alloy is developed by simple pyrolysis of Cu/Ni-metal-organic framework. The CuNi0.05@OC catalyst displays superior performance for atmospheric pressure transfer hydrogenation of p-chloronitrobenzene and p-nitrophenol, and for hydrogenation of furfural, all in water and with exceptional durability. Comprehensive characterizations confirm the close interactions between the diluted Ni sites, the base Cu, and optimized three-layered graphene chainmail. Theoretical calculations demonstrate that the properly tuned lattice strain and Schottky junction can adjust electron density to facilitate specific adsorption on the active centers, thus enhancing the catalytic activity and selectivity, while the OC shell also offers robust protection. This work provides a simple and environmentally friendly strategy for developing practical heterogeneous catalysts that bring the synergistic effect into play between dilute alloy and functional carbon wrapping.

Correction: An interfacial toughening strategy for high stability 2D/3D perovskite X-ray detectors with a carbon nanotube thin film electrode.

Correction for 'An interfacial toughening strategy for high stability 2D/3D perovskite X-ray detectors with a carbon nanotube thin film electrode' by Liwen Qiu et al., Nanoscale, 2023, 15, 14574-14583, https://doi.org/10.1039/D3NR02801A.

Beyond Planar Structure: Curved π-Conjugated Molecules for High-Performing and Stable Perovskite Solar Cells.

Perovskite solar cell (PSC) shows a great potential to become the next-generation photovoltaic technology, which has stimulated researchers to engineer materials and to innovate device architectures for promoting device performance and stability. As the power conversion efficiency (PCE) keeps advancing, the importance of exploring multifunctional materials for the PSCs has been increasingly recognized. Considerable attention has been directed to the design and synthesis of novel organic π-conjugated molecules, particularly the emerging curved ones, which can perform various unmatched functions for PSCs. In this review, the characteristics of three representative such curved π-conjugated molecules (fullerene, corannulene and helicene) and the recent progress concerning the application of these molecules in state-of-the-art PSCs are summarized and discussed holistically. With this discussion, we hope to provide a fresh perspective on the structure-property relation of these unique materials toward high-performance and high-stability PSCs.

De-Pinning Fermi Level and Accelerating Surface Kinetics with an ALD Finish Boost the Fill Factor of BiVO4 Photoanodes to 44.

With the rapid development of performance and long-term stability, bismuth vanadate (BiVO4 ) has emerged as the preferred photoanode in photoelectrochemical tandem devices. Although state-of-the-art BiVO4 photoanodes realize a saturated photocurrent density approaching the theoretical maximum, the fill factor (FF) is still inferior, pulling down the half-cell applied bias photon-to-current efficiency (HC-ABPE). Among the major fundamental limitations are the Fermi level pinning and sluggish surface kinetics at the low applied potentials. This work demonstrates that the plasma-assisted atomic layer deposition technique is capable of addressing these issues by seamlessly installing an angstrom-scale FeNi-layer between BiVO4 and electrolyte. Not only this ultrathin FeNi layer serves as an efficient OER cocatalyst, more importantly, it also effectively passivates the surface states of BiVO4 , de-pins the surface Fermi level, and enlarges the built-in voltage, allowing the photoanode to make optimal use of the photogenerated holes for achieving high FF up to 44% and HC-ABPE to 2.2%. This study offers a new approach for enhancing the FF of photoanodes and provides guidelines for designing efficient unassisted solar fuel devices.

Prompt Hole Extraction Suppresses V5+ Dissolution and Sustains Large-Area BiVO4 Photoanodes for Over 2100 h Water Oxidation.

Nanostructured bismuth vanadate (BiVO4) is at the forefront of emerging photoanodes in photoelectrochemical tandem devices for solar water splitting owing to the suitable band edge position and efficient charge separation capability. However, the (photo)chemical corrosion involving V5+ dissolution limits the long-term stability of BiVO4. Herein, guided by DFT calculations, we introduce an ALD-derived NiOx catalyst layer on BiVO4 to stabilize the surface Bi-O bonds, facilitate hole extraction, and thus suppress the V5+ dissolution. At the same time, the ALD NiOx catalyst layer could efficiently suppress the surface recombination and accelerate the surface OER kinetics, boosting the half-cell applied bias photon-to-current efficiency of BiVO4 to 2.05%, as well as a fill factor of 47.1%. By adding trace NaVO3 to the electrolyte, the NiOx/BiVO4 photoanode with an illumination area of 10.5 cm2 shows a record operational stability of more than 2100 h.

An interfacial toughening strategy for high stability 2D/3D perovskite X-ray detectors with a carbon nanotube thin film electrode.

Single-crystalline metal halide perovskite materials hold great promise for developing next-generation low-dose X-ray detection. To bring this new technology into reality, it is important to improve the durability of perovksite detectors by suppressing the well-known corrosion and ion diffusion problems at the perovskite/electrode interface. For imaging application, it is also imperative to develop new assembling approaches to realise non-planar interconnection between thick perovskite crystals and thin-film transistor (TFT) backplanes. Herein, a flexible and mechanically robust carbon nanotube (CNT) film was proposed to replace noble metal electrodes. The proposed CNT film, whose binder contains a carboxyl group, can form solid contact with a phenethylamine-based two-dimensional (2D) perovskite via amide coupling, thus toughening the perovskite-electrode interface. The resulting CNT/2D-3D perovskite detector shows an applaudable low dark current, high sensitivity, a low dose detection limit and excellent stability, retaining 98% of its initial sensitivity after storage for three months. Moreover, the flexible CNT films are also beneficial for making non-planar interconnection between thick perovskite crystals and TFT backplanes. The proposed flexible CNT thin film electrode thus provides a facile route towards realising a low-dose, high-resolution and highly stable perovskite X-ray detector.

Long-Chain Gemini Surfactant-Assisted Blade Coating Enables Large-Area Carbon-Based Perovskite Solar Modules with Record Performance.

Carbon-based perovskite solar cells show great potential owing to their low-cost production and superior stability in ambient air. However, scaling up to high-efficiency carbon-based solar modules hinges on reliable deposition of uniform defect-free perovskite films over large areas, which is an unsettled but urgent issue. In this work, a long-chain gemini surfactant is introduced into perovskite precursor ink to enforce self-assembly into a network structure, considerably enhancing the coverage and smoothness of the perovskite films. The long gemini surfactant plays a distinctively synergistic role in perovskite film construction, crystallization kinetics modulation and defect passivation, leading to a certified record power conversion efficiency of 15.46% with Voc of 1.13 V and Jsc of 22.92 mA cm-2 for this type of modules. Importantly, all of the functional layers of the module are printed through a simple and high-speed (300 cm min-1) blade coating strategy in ambient atmosphere. These results mark a significant step toward the commercialization of all-printable carbon-based perovskite solar modules.

Effects of Foxp3 gene silencing on the expression of inflammatory cytokines and the proliferation and migration of human periodontal ligament fibroblasts in an inflammatory environment.

OBJECTIVES: This study aimed to clarify the effects of Foxp3 silencing on the expression of inflammatory cytokines in human periodontal ligament cells (hPDLFs) in an inflammatory environment and on cell proliferation and invasiveness, as well as to explore the role of Foxp3 gene in the development of periodontitis. METHODS: An small interfering RNA (siRNA) construct specific for Foxp3 was transfected into hPDLFs. Foxp3 silencing efficiency was verified by reverse transcription-polymerase chain reaction (RT-PCR) and Western blotting, and the siRNA with the optimum silencing effect of Foxp3 gene was screened. Using lipopolysaccharide to simulate an inflammatory environment in vitro, CCK-8 detected the effect of silencing Foxp3 on hPDLFs proliferation under inflammatory conditions. Wound-healing experiments and transwell assays were conducted to detect the effect of silencing Foxp3 on hPDLF migration under inflammatory conditions. The expression of the inflammatory cytokines interleukin (IL)-6 and IL-8 was detected by RT-PCR and Western blotting under inflammatory conditions. RESULTS: After siRNA transfection, RT-PCR and Western blotting analyses showed that the expression of Foxp3 mRNA in the Foxp3-si3 group decreased significantly (t=21.03, P<0.000 1), and the protein expression of Foxp3 also decreased significantly (t=12.8, P<0.001). In the inflammatory environment, Foxp3 gene silencing had no significant effect on hPDLFs proliferation (P>0.05), and Foxp3 gene silencing promoted hPDLFs migration (P<0.05). Moreover, the expression of IL-6 and IL-8 increased (P<0.05). CONCLUSIONS: In an inflammatory environment, Foxp3 gene silencing promoted hPDLFs migration but had no significant effect on hPDLFs proliferation. The expression of inflammatory factors expressed in hPDLFs increased after Foxp3 gene silencing, indicating that Foxp3 gene inhibited inflammation in periodontitis.

Bowl-Assisted Ball Assembly for Solvent-Processing the C60 Electron Transport Layer of High-Performance Inverted Perovskite Solar Cell.

Pristine fullerene C60 is an excellent electron transport material for state-of-the-art inverted structure perovskite solar cells (PSCs), but its low solubility leaves thermal evaporation as the only method for depositing it into a high-quality electron transport layer (ETL). To address this problem, we herein introduce a highly soluble bowl-shaped additive, corannulene, to assist in C60 -assembly into a smooth and compact film through the favorable bowl-ball interaction. Our results show that not only corannulene can dramatically enhance the film formability of C60 , it also plays a critical role in forming C60 -corannulene (CC) supramolecular species and in boosting intermolecular electron transport dynamics in the ETL. This strategy has allowed CC devices to deliver high power conversion efficiencies up to 21.69 %, which is the highest value among the PSCs based on the solution-processed-C60 (SP-C60 ) ETL. Moreover, the stability of the CC device is far superior to that of the C60 -only device because corannulene can retard and curb the spontaneous aggregation of C60 . This work establishes the bowl-assisted ball assembly strategy for developing low-cost and efficient SP-C60 ETLs with high promise for fully-SP PSCs.

Fe(III) Docking-Activated Sites in Layered Birnessite for Efficient Water Oxidation.

Non-noble metal catalysts for promoting the sluggish kinetics of oxygen evolution reaction (OER) are essential to efficient water splitting for sustainable hydrogen production. Birnessite has a local atomic structure similar to that of an oxygen-evolving complex in photosystem II, while the catalytic activity of birnessite is far from satisfactory. Herein, we report a novel Fe-Birnessite (Fe-Bir) catalyst obtained by controlled Fe(III) intercalation- and docking-induced layer reconstruction. The reconstruction dramatically lowers the OER overpotential to 240 mV at 10 mA/cm2 and the Tafel slope to 33 mV/dec, making Fe-Bir the best of all the reported Bir-based catalysts, even on par with the best transition-metal-based OER catalysts. Experimental characterizations and molecular dynamics simulations elucidate that the catalyst features active Fe(III)-O-Mn(III) centers interfaced with ordered water molecules between neighboring layers, which lower reorganization energy and accelerate electron transfer. DFT calculations and kinetic measurements show non-concerted PCET steps conforming to a new OER mechanism, wherein the neighboring Fe(III) and Mn(III) synergistically co-adsorb OH* and O* intermediates with a substantially reduced O-O coupling activation energy. This work highlights the importance of elaborately engineering the confined interlayer environment of birnessite and more generally, layered materials, for efficient energy conversion catalysis.

Solvent engineering of MAPbI3 perovskite thick film for a direct X-ray detector.

The emergence of organic-inorganic hybrid perovskites with a high µτ product and a high absorption coefficient has made it possible to adopt an aerosol-liquid-solid technology for direct X-ray detectors. The film quality from the ALS process is often compromised, especially on the film surface, when deposited in ambient conditions with uncontrolled humidity. Herein we develop a solvent engineering strategy in the ALS process to obtain high-quality MAPbI3 thick films. The key is the introduction of a molecular additive to intervene and regulate the perovskite crystallization process so that the negative effect of the ALS ambience is minimized. This strategy allows us to prepare direct X-ray detectors with much reduced dark current, enhanced response speed and improved overall performance.

De Novo Studies of Working Mechanisms for Self-Driven Narrowband Perovskite Photodetectors.

Self-driven narrowband perovskite photodetectors have recently attracted significant attention due to their simple preparation, high performance, and amenability for system integration. However, the origin of narrowband photoresponse and the related regulation mechanisms still remains elusive. To address these issues, we herein perform a systematic investigation by formulating an analytic model in conjunction with finite element simulation. The optical and electrical simulations have resulted in design principles for perovskite narrowband photodetectors in terms of the dependence of external quantum efficiency (EQE) on perovskite layer thickness, doping concentration, and band gap as well as trap state concentration. Careful investigations on the profiles of electric field, current, and optical absorption reveal the dependence of narrowband EQE on the direction of incident light and perovskite doping types: only p-type perovskite can yield the narrowband photoresponse for illumination from the hole transport layer (HTL) side. The simulation results demonstrated in this study shed new light on the mechanism of perovskite-based narrowband photodetectors and provide valuable guidance for their design.

Rationally Reconstructed Metal-Organic Frameworks as Robust Oxygen Evolution Electrocatalysts.

Reconstructing metal-organic framework (MOFs) toward a designed framework structure provides breakthrough opportunities to achieve unprecedented oxygen evolution reaction (OER) electrocatalytic performance, but has rarely, if ever, been proposed and investigated yet. Here, the first successful fabrication of a robust OER electrocatalyst by precision reconstruction of an MOF structure is reported, viz., from MOF-74-Fe to MIL-53(Fe)-2OH with different coordination environments at the active sites. Due to the radically reduced eg -t2g crystal-field splitting in Fe-3d and the much suppressed electron-hopping barriers through the synergistic effects of the O species the efficient OER of in MIL-53(Fe)-2OH is guaranteed. Benefiting from this desired electronic structure, the designed MIL-53(Fe)-2OH catalyst exhibits high intrinsic OER activity, including a low overpotential of 215 mV at 10 mA cm-2 , low Tafel slope of 45.4 mV dec-1 and high turnover frequency (TOF) of 1.44 s-1 at 300 mV overpotential, over 80 times that of the commercial IrO2 catalyst (0.0177 s-1 ).Consistent with the density functional theory (DFT) calculations, the real-time kinetic simulation reveals that the conversion from O* to OOH* is the rate-determining step on the active sites of MIL-53(Fe)-2OH.

MOF-Transformed In2O3-x@C Nanocorn Electrocatalyst for Efficient CO2 Reduction to HCOOH.

For electrochemical CO2 reduction to HCOOH, an ongoing challenge is to design energy efficient electrocatalysts that can deliver a high HCOOH current density (JHCOOH) at a low overpotential. Indium oxide is good HCOOH production catalyst but with low conductivity. In this work, we report a unique corn design of In2O3-x@C nanocatalyst, wherein In2O3-x nanocube as the fine grains dispersed uniformly on the carbon nanorod cob, resulting in the enhanced conductivity. Excellent performance is achieved with 84% Faradaic efficiency (FE) and 11 mA cm-2 JHCOOH at a low potential of - 0.4 V versus RHE. At the current density of 100 mA cm-2, the applied potential remained stable for more than 120 h with the FE above 90%. Density functional theory calculations reveal that the abundant oxygen vacancy in In2O3-x has exposed more In3+ sites with activated electroactivity, which facilitates the formation of HCOO* intermediate. Operando X-ray absorption spectroscopy also confirms In3+ as the active site and the key intermediate of HCOO* during the process of CO2 reduction to HCOOH.

Surface Re-Engineering of Perovskites with Buckybowls to Boost the Inverted-Type Photovoltaics.

Despite their multifaceted advantages, inverted perovskite solar cells (PSCs) still suffer from lower power conversion efficiencies (PCEs) than their regular counterparts, which is largely due to recombination energy losses (Eloss) that arise from the chemical, physical, and energy level mismatches, especially at the interfaces between perovskites and fullerene electron transport layers (ETLs). To address this problem, we herein introduce an aminium iodide derivative of a buckybowl (aminocorannulene) that is molecularly layered at the perovskite-ETL interface. Strikingly, besides passivating the PbI2-rich perovskite surface, the aminocorannulene enforces a vertical dipole and enhances the surface n-type character that is more compatible with the ETL, thus boosting the electron extraction and transport dynamics and suppressing interfacial Eloss. As a result, the champion PSC achieves an excellent PCE of over 22%, which is superior compared to that of the control device (∼20%). Furthermore, the device stability is significantly enhanced, owing to a lock-and-key-like grip on the mobile iodides by the buckybowls and the resultant increase of the interfacial ion-migration barrier. This work highlights the potential of buckybowls for the multifunctional surface engineering of perovskite toward high-performance and stable PSCs.